Replacing Lock in a UPVC Door
Replacing a lock in a Upvc door can be a challenge however with the proper preparation and the right knowledge, it can be done quickly and easily. This article will help you understand the process and get started.
The first step is to take off the screw that secures the barrel lock. It is a different colour to the other screws and can be found near the edges of the door.
Preparation
Replace the door lock if you have a faulty one or you want to upgrade. However, prior to starting, you must prepare the door for this task. First open the door wide and prop it up with blocks of wood on each side to keep it from closing while you are working on it. This will stop the door from breaking the frame or the door when you try to remove or alter the lock.
The next step is to check the door for any indications of wear and tear. If you notice any issues, like a broken handle or loose hinges it is advised to call a professional locksmith to take care of the repair. A professional locksmith will have the tools and expertise to resolve the issue without causing any further damage.
A floppy door handle mechanism can be caused by a number of different things but the most common cause is an unlubricated lock. This can be repaired by lubricating hinges, however, it is also possible that the problem is caused by a problem with the internal mechanism of the lock itself.
When replacing a lock made of upvc it is essential to keep in mind that the barrel lock can be removed and replaced from the cylinder. To do double glazing window lock replacement RepairMyWindowsAndDoors , a screwdriver of standard size is required as well as the correct key. Once you have these tools, it is recommended to remove any screws that hold the lock in place so you can see what is actually going on with the mechanism.
It is a good idea to label each screw once you have removed them. This will allow you to place them back where they belong when you put back the lock together. This will help you avoid frustration and time when you reassemble the lock.
To determine the right replacement, you will also need to know the size of the lock cylinder. To determine this, take off the old lock cylinder and measure. Once you have the measurements, you can search online to find the appropriate replacement cylinder.
Removal of the Cylinder
If you are changing the lock on a upvc-glazed door on your own it is important to know that the barrel holds the tumblers. The key needs to be positioned with the barrel in order to open the door. You will need to be able remove the handle from the edging and then gain access to the side of the faceplate to detach it. You can use a paperclip to unclip the handle in the interior if you have full access. But if you don't have complete access, you'll need to employ an even more robust method such as drilling out the old pins.
Once you've accessed the lock cylinder, you'll need locate the screw that is affixed to it. It's typically a larger-headed screw that is aligned with the lower end and ought to be loos. Once you have removed this the cylinder should slide out very easily. After that, you can easily take off the handles.
It is recommended to measure the cylinder when it is still in place. With a tape measure or ruler, you should be able to determine the length starting from the centre of the screw hole (or in the case of pencil marks on either side of the cylinder, then between the pencil marks) and then the length from one end to the other - this will give you your measurement.
If you know the measurements of the cylinder, you'll have to purchase a new cylinder. This is typically a simple job, but be careful when you order as a lot of cheap cylinders are sold incorrectly and leave the lock vulnerable to gaining access through a technique called "lock snapping" which is simple for criminals to commit with enough time and the right tools. After receiving the new cylinder, it should slide into place nicely with no difficulty, if there is any doubt, a professional locksmith will be able to assist.
Replacement of the Cylinder
uPVC doors are generally strong however, like any lock mechanism, they may wear out over time. They are also prone to contraction and expansion, and even a single millimeter out of alignment can be enough to prevent the door from locking or unlocking properly. Most often, the lock is damaged or broken when it is hit by a kick or slammed onto a hard surface, but sometimes the materials simply fatigue and become brittle over time. No matter how the issue is caused, it is typically the cylinder of the lock that is in need of replacement.

It is simple to change the barrels of locks on your uPVC doors. The task can be done in just five minutes. You might want to replace the barrel of your lock for many reasons, such as if a tenant has left your property without returning the key, or in the event that the door was struck hard and the cylinder broke.
If you have a spare cylinder, you can replace it. However, you need to be sure that the replacement cylinder is of the right size for your door. To do this you will be required to measure from the center screw hole on one side of the cylinder up to the centre of the square spindle on another. Once you know these measurements you will be able to get the correct sized of cylinder from a lock replacement supplier.
When it comes to actually replacing the cylinder, you'll require a pair of screw extractors or a set of drill bits specially designed for this type of work. These are available at most hardware stores, home improvement shops, hardware stores, and online. Before you begin to remove the lock cylinder from your door, it's essential to prop the door up so that you have full access to the outside face plate of the lock.
Once the new cylinder is installed, you'll need reinstall it and then trap with long screws that are inserted into the hole that holds the plate for locking. Once this is done then you can screw the long screw back in place and then test your door to make sure it locks correctly.
Striker Plate Replacement
If your uPVC door lock mechanism is sticking when it is closed, it is a problem with the uPVC door or the strike plate. This could be due to the uPVC expanding or contracting, if the strikeplate is loosened or the lock is not in alignment.
It is recommended to lubricate the lock first. This will allow you to remove the obstruction and allow it to function again. You can use dry lubricants, such as graphite or wet-lubricants such as WD-40. Make sure you select an oil that is safe for use with your uPVC door and lock.
It is also possible to tighten the uPVC strike plate screws, which could help to prevent the cylinder from moving. It is important to be careful to not cause damage to the screw that holds it, however it is usually done using a standard screwdriver.
Replace the strike plate in order to fix the uPVC locking problem. You can do this by using a cross-tip number 3 screwdriver or a torque bits set. Before replacing the strike plate, you should clean it and sand any sharp edges on the surface of the mounting. After sanding the surface apply a filler, such as fiberglass or aluminum compound. This will fill in the cracks and stop water from getting into and damaging the cabin.
UPVC windows and doors offer numerous benefits including energy savings and improved security. They can also boost the value of your home in case you decide to sell. However, they can be costly so it is crucial to research the market before you invest.
UPVC is an material that can stand up to the harshest conditions. It is also nonporous and will not rust, making it an ideal choice for areas that experience heavy rainfall. UPVC doors aren't ideal for everyone since they come with limited customization options.